admin
A leather strap planter is a simple way to display a small potted plant at a different height while adding a decorative accent to a room. This project combines leather straps, brass hardware, and chain to create a supportive hanging holder. Choose a planter that fits the harness and measure it before cutting so the straps sit securely around its base and sides.
Supplies for a Leather Strap Planter
- Leather or faux leather
- Brass Chicago screws
- A small planter
- Rotary cutter, cutting mat, and metal ruler, or fabric scissors
- Leather hole punch sized for the Chicago screws
- Brass chain or rope
- Four gold key rings
- A cup hook; use an anchor when hanging a large or heavy plant
Check the fit of the hardware before assembling: the punch needs to make holes large enough for the Chicago screws. If using faux leather, test a small offcut first to make sure it cuts and punches cleanly.
How to Make the Leather Strap Planter
1. Measure and cut the crossing straps
Measure from one side of the planter, underneath its base, and up the opposite side. Add 6 inches to the measurement to allow for the hanging loops at both ends. Cut two strips of leather, each 1 inch wide, to this total length. Use a ruler and cutting mat for straight, even edges.
2. Make the hanging loops
Fold down 1 1/2 inches at both ends of each strip. Punch a hole 1/2 inch from the end, making sure the hole passes through both leather layers. Fasten each folded end with a Chicago screw to create a loop. Keep the folds consistent so the planter hangs evenly.
3. Join the straps into an X
Decide where the horizontal band should sit around the planter. Measure upward from the planter’s bottom center, then punch a hole at the center of each long strap. Layer the straps over one another in an X shape and join them with a Chicago screw. Using the same measurement from the bottom center, mark four matching positions—one on each strap—and punch the holes.
4. Add the horizontal band
Measure loosely around the planter, add 1 inch for overlap, and cut a 1-inch-wide leather strip to that length. Overlap the ends by 1 inch and punch a hole through both layers. Punch three more holes, spacing all four holes evenly around the band.
Use four Chicago screws to attach the band to the four holes on the X-shaped straps. Check that the band sits level and that the planter is supported before adding the hanging hardware.
Hang and Style Your Planter
Attach four key rings to the leather loops, then connect them to brass chain or rope. The chain provides a coordinated look with the brass screws, while rope is another option. Select a cup hook suitable for the installation point, and use an anchor for a large or heavy plant. Before hanging, test the holder close to the floor and confirm the planter remains balanced.
Trailing plants can work especially well in a hanging display, provided the planter and hanging point can support their weight. A leather strap planter can also complement other plant displays, such as a stand or shelf. For a neat finish, position the crossing straps evenly and check the hardware periodically. This DIY leather strap planter offers a practical way to add height and variety to an indoor plant arrangement.
Project by Laura
